Product name:8mm thickness 24W 1x2ft led anel light(3 steps dimming)

Model:ZS-CP-01

8mm thickness 24W 1x2ft led panel light(3steps dimming)

• Led chip: SMD2835

• thickness: 8mm

• CRI: over 80Ra

• Warranty: 5 years

• Installation method: 1) Embedded; 2) Hanging; 3) Ceiling surface

 Back view:

back view of 24W 1x2ft steps dimming led panel light

Features:

1)      Driver: Isolated with constant current output, Rubycon capacitors from Japan, built-in 2 PFC(PFC+PWM) circuit to realize better stability and completely avoid flickering.(PFC=power factor correction)

2)      Installation method: 1) Embedded; 2) Hanging; 3) Ceiling surface

3)      Dimmable option: 1) Step dimming by push switch at 10%, 40%, 100%, 2)0-10V dimming system

4)      Imported Material: Aluminum Alloy + PMMA

5)      Color Rendering Index: CRI over 80Ra

6)      Power factor: over 0.95

7)      Beam way: two sides light emitting

8)      LED Chips: SMD3528 from Epistar

Technical Parameters

Input voltage: AC100-240V

Working voltage: 28-36V

Working Temperature: -10 to +40Celsius degree

IP rate: IP41

Color Rendering Index(CRI): Ra>80

Color Temperature(CCT): 2900-6500K

Lighting Angle: 120°

Power factor: PF>0.9

 

Installation steps:for hanging type



hanging type installlation of steps dimming led panel

 

 

Installation steps: for hanging type

Step 1: punch 2 holes in the ceiling.

Step 2: punch the 'Plug'in

to holes.

Step 3: lock-in the base to plug hole with 'self tapping screw'

Step 4: screw the fast connect into the base.

Step 5: fix the base on the ceiling surface.

Step 6: fix the base main part and base plate with screws.

Step 7: draw the "input power wire" from wire entry then connect with terminal.

Step 8: installation finished.

Note:

1.    rip off the pellicle after you finish the installation, to ensure no dust inside LED panel.

2.    firstly, Debugging the LED panel after installation, then power on.

3.    only fixation and maintenance by professional person.

Other installation mothod:

suspending installation of this square led panel light fitting:

ceiling surface installation of this square led panel light fixture

embedded installation of 8mm thickness dimmable led panel light fitting

Packing:

Packing of dimmable square led panel light fitting

Note:

1.    when installation, try to avoid the minefields, strong magnetic field and high-voltage area.

2.    ensure a solid connection correctly in order to avoid short-circuit damage to components and trigger fires.

3.    installed in a well-ventilated place to ensure appropriate environmental temperature.

4.    please check local voltage in accordance with the product requirements before using the product.

5.    to prohibit the live wiring, check to confirm the wiring correct, confirm no short-circuit and then power on.

6.    in case of failures, do not maintain it in private.

Application:

Application of dimmable square led panel light fitting