Product name:1.2m 18W T10 Emergency Light( 8hours charging time)

Model:ZS-T8E-SMD-3014

---1.2m 18W T10 Emergency Light( 8hours charging time)

Features:

1) Led chips: High brightness SMD3014 LED

2) Charging time: 8hours

3) Duration time for emergency: 180M±20M

4) CRI: >80Ra

5) Built-in Lithium battery which can maintain 80% original capacitance after repeated charging and discharging over 500 times. 

6) With normal utility power supply,can be used as normal tube and can be switched on and off; When there is a power failure, the emergency function began to work and the tube maintains 30% lumen.

Specifications:

CCT: 5700-6500K

Input voltage: 100-240VAC

Rated Frequency: 47-63HZ

Power Factor:>0.9

Lighting Angle: 120℃

Material: Anti-corrosion aluminium+imported PC

Working Temperature: -20℃-40℃

Average Lifespan: 30,000H

Product structure:

---product structure of 1.2m 18W T10 Emergency Light( 8hours charging time)

Illumination distribution drawing:

---Illumination distribution drawing of T10 Emergency Light with beam angle of 102.44°(normal lighting)

---Illumination distribution drawing of T10 Emergency Light with beam angle of 103.84°(normal lighting)

Test report:

---test report of 18W T10 Emergency Light with 102.44°beam angle(normal lighting)

---test report of 18W T10 Emergency Light with 103.84°beam angle(normal lighting)

Connection Wire Drawing:

---connection wire drawing of 18W T10 Emergency Light

Notes:

1. Connect L to the AC L power line. The L line will power the battery, detect power disruption. When there is a power failure, the emergency lighting module will begin to work.

2. L-SW connects to AC L power line by on/off switch and it controls on/off switch of normal lighting. AC N is connected to the null line.Please make sure to connect the emergency tube according to the above diagram, otherwise failure in emergency function may be incurred or light may stay on at 100%.

3. With normal utility power supply, the tube works in the same way as other standard tubes and goes on/off. When utility power fails, the tube will bypass on/off wall switch and turn on automatically at 30% brightness. Light output in emergency mode reaches 30% of its original lumen, lasting for over 180 minutes.

Usage for emergency on-off switch:

---The usage for T10 emergency light on-off switch

Installation instruction:

---Installation instruction for T10 emergency light tubes with electronic ballast holders

---Installation instruction for T10 emergency light tubes with inductive ballast holders

Application:

1. Stairwells, fire escapes, studios;

2. Car park, basements, semi-basements;

3. Audience halls, showrooms, multi-functional hall, canteens;

4. Passageways, supermarkets, factories, hospitals, schools

Warning:

1. Please follow the connection wire strictly.

2. As this product comes with a built-in Lithium battery, please keep this product at a safe distance from fire.

3. Avoid laying heavy pressure on the tube, or it would affect the stability of the product.

4. Please keep the power off until connection is fully completed.

5. Make sure the product is properly installed and connected, to avoid damages to the parts or fires triggered by short-circuit.

6. Do not directly stare into the luminaire with its light on for a long time, or it would cause damage to your eyes.

7. The tube should be installed, dismantled or repaired by a qualified electrician.