Model: CT-D01-A1

Name: DMX Decoder

Summary

This product can be connected with the digital controller through interface XLR-3 or interface RJ45 and can receive DMX control signal and convert the signal into PWM dimmable signal. Which can make LED light dimmer color mixture effects etc. Then when numerous LED decoders are connected the DMX control system has been composed, which brings out light dimming or mode changing, Customers can also use internal  test function  to achieve  static color, jumping, gradual changing and so on. With easy connection stable signal transmission, little distraction, long lifespan, and this product  can be widely  used for stage lighting, RGB dimming, flood lighting, construction lighting and so on.

Features

• Receiving DMX512 (1990) signal, and transfer channel value to LED luminance value.

• 3 channels will be used, multi-color performance can be adopted through 3 channels.

• 2 working modes, DMX modes and inside operating modes.

• 2 standard DMX signal interface: XLR-3 and RJ45.

• DMX addressing number can be set by the dial, switch.

•16,777,216 colors can be realized by DMX512.

• Available for 16 inside modes and 32 speed steps.

•Standard green plunge is adopted for the output .With installation fixing holes, can be installed conveniently.

------DMX Decoder

Technical parameters

Interface specifications

------Interface specifications of DMX Decoder

------Interface specifications of DMX Decoder

Usage specifications

• DMX functions usage specifications

When the dial switch FUN (1O) =OFF (O) the function mode of the DMX signal controller is on.

Every DMX decoder occupies 3 DMX addresses. Dial switch is adopted to set the address. The switch number 1-9 is used for setting binary code switch. And the first number is the lowest digit, and the ninth number is the top digit511 address number can be set in total. DMX start-stop address = the total sum of code switch 1-9. Dial the dip-switch downwards (ON set on 1) then the address value is obtained; Dial the dip-switch upwards (ON set on 0) then the address value is 37.

Example 1

Referring to picture 1, if needing to set the DMX start-stop address on 37then the sixth, third and first position f the decode switch should be set on 1others set on O, so the total sum of the code switch 1-9 is 32+4+1that is, the DMX 512 start-stop address number is 37.

------Usage specifications of Interface specifications of DMX Decoder

Example2:

Referring to the picture 2, if needing to set the DMX start-stop address on 328, then the 9th, 7th, 4th, position of the decode switch should be 1, other5 5et on 0, 50 the total 5um of the code switch 1-9 is 256+64+8, that is the DMX 512 start-stop address number is 328.

------Usage specifications of Interface specifications of DMX Decoder

• Bulit-in function modes instructions

1 Bulit-in function modes Description:

When dialup FUN (10)=ON(the DMX 512 controller will be in built-in function.

Dial switch 1-4 is mode setting position 5-9 is speed setting position, referring to pictures 3 as follows setting the switch the 10th, 8th, 5th, 4th,  2nd as 1, the others 0, the mode position now is 8+2, the speed position now is 8+2+1, it means the modes is 10 the speed is 11.

------Bulit-in function modes instructions of Interface specifications of DMX Decoder

2, Modes table

------Modes table of DMX Decoder

3, speed choosing: (jump gradient mode)

Among the inside functions, when in dynamic modes32 speed steps can be adopted in every performance.

------Speed choosing of DMX Decoder

Product size

------Product size of DMX Decoder

Typical application

------Typical application of DMX Decoder

Product packaging

------Product packaging of DMX Decoder

Applications

• Exterior decoration.

• Indoor lighting control.

• Bridge outline decoration.

• Attractions decoration.

• Other need to unite the change control LED occasion.

Product accessories

------Product accessories of DMX Decoder

Install caution

1. Please install the products by professional electrician.

2. This product can not waterproof, please put into water-proof tank if the clients want to use it outdoor.

3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.

4. Please don't install this controller in lightening    intense magnetic and high voltage fields.

5. Check if the voltage and power adapter suit the controller and LED lights.

6. Please make sure the wires can sufficiently load the LED lights for avoiding accident.

7. Please make sure all the wires are connected correctly before switching on the power.

After sales service

1. The customers enjoy lifelong technical support for our products.

• Free Warranty: The customers enjoy free maintenance or replacement for quality problems within one year upon date of purchasing.

• Paid warranty: If the free warranty time is overdue, we will charge certain cost of raw materials for repair or maintenance.

2. Following cases are excluded free warranty terms:

• Any defects caused by unauthorized removal, maintenance, modifying circuit, incorrect connections and placing chips.

• Any damages caused by negligence, inappropriate storing at high temperature and humidity or environment near harmful chemical.

• Any damages due to transportation, breaking, flooding water after the purchase.

• Product appearance seriously damaged or deformation.

• Any damages caused by earthquake, fire, flood, lighting strike etc force majeure of natural disasters.

3. Our company would take up the biggest responsibility to replace the same type and quantity accordingly.

4. The clients please inform suppliers the faulty phenomena, using environment etc. for speeding up the maintenance process.